Magnetic Filter Cleans Coolant in a Grinding Machine
Friess Magnetic Filter used to Optimise Coolant in Grinding Process
The FMG Magnetic Grid removes particles such as iron and steel from process fluids. In addition, it can prevent particles of stainless steel or carbide from accumulating unhindered in the liquid.
The grid is mounted in the cooling lubricant tank for this purpose. Placed directly in front of the pump in the direction of flow, as much of the liquid as possible that is sucked in by the pump passes through the magnetic grid. The outer surfaces of the Magnetic Filter bars attract the dirt particles in the liquid.
After some time, the grid must be cleaned of the particles. However, you do not need a special maintenance service for this. Cleaning is very simple as it only involves wiping off the dirt.
To meet your individual needs, the Friess Magnetic Grid FMG is available in different sizes.
FMG 310/4
Magnetic rods: 4 pcs
Flow rate: max. 250 l/min
Dirt holding capacity: max. 3 kg
Weight: 6.4 kg
Temperature: 5 °C – 60 °C
Dimensions: 172 mm x 82 mm x 434 mm
FMG 420/6
Magnetic rods: 6 pcs
Flow rate: max. 500 l/min
Dirt holding capacity: max. 6 kg
Weight: 11.7 kg
Temperature: 5 °C – 60 °C
Dimensions: 236 mm x 82 mm x 634 mm
